Wedge Belt Figure; Shift Cable Adjustment - Joyner TROOPER-T2 Owner's Manual

5. Make sure spark plugs hole lip is clear.
6. The spark plugs is hot after a long-time driving, make sure the spark plugs is not hot
before operation.

Wedge belt figure

Correct installation and the proper tension will ensure electrical generator and air
conditioner work well. If chap, tear, wear，or looseness happen, contact Joyner dealer
and replace it immediately.
Check the belt tension:
Apply a pressure (about 100N/22.48lbf) on the belt, if the movement is more than
10mm/0.4inch, it is necessary to replace the belt.
When checking the wedge belt, never start engine, or body injury even death may occur.

Shift cable adjustment

After a long time use, more and more free play of shift cable make gear position is not
accurately or shift lever in a wrong position, so adjust the shift cable refer to
Preventative maintenance and service log.
1. Loosen the adjustment nuts, move the cable forwards or backwards
according situation, repeat it until find a position where gear shift work correctly
and the shift lever work in a proper position.
2. Repeat step 1 with another shift cable.
3. Tighten all of the adjustment nuts.
10mm/0.4inch
48