Key Features - QDI P4I848P Manual

Introduction Introduction Introduction
Introduction Introduction

Key Features

Form factor
ATX form factor of 305mm x 210mm
Microprocessor
Supports Intel
Supports Intel
800 MHz FSB
Supports Intel
/2.8/3.06GHz and above
Supports 400/533/800MHz host bus speed
System memory
Provides two 184-pin DDR SDRAM interfaces
Supports DDR266/333/400 SDRAM
Supports 64/128/256/512Mb technology up to 2GB
Onboard IDE
Supports Independent timing of up to 4 drives
Supports Ultra ATA 33/66/100, PIO mode
2
Two fast IDE interfaces supporting four IDE devices including IDE hard disks and CD ROM
drives
Onboard LAN(Available on -L, -K)(optional)
10/100/1000(available on -Kmainboard) Mbit/sec Ethernet support
10/100/1000M(available on -K mainboard) LAN interface built-in on board
Note: If the mainboard has onboard LAN, PCI1 slot only can connect to slave device.
USB 2.0
USB 2.0 compliant, operates at 480Mbps, about 40X times faster than USB 1.1 which cur-
rently works at a snails pace of just 12Mbps
Provides 8 USB 2.0 ports
Onboard I/O
One floppy port supporting up to two 3.5
/2.88M format
One high speed 16550 compatible COM with 16 byte send/receive FIFO
One parallel port supports SPP/EPP/ECP mode
Supports PS/2 mouse and PS/2 keyboard
Provides one IrDA connector
All I/O ports can be enabled/disabled in the BIOS setup
® Pentium 4 (Hyper-Threading) socket 478 processors
® Pentium 4 (Northwood) socket 478 processors at 2.4/2.6/2.8/3.06/3.2GHz with
Pentium 4 (Northwood) socket 478 processors at 1.8/2.0/2.2/2.26/2.4/2.53/2.66
®
" "
or 5.25 floppy drives with 360K/720K/1.2M/1.44M
QDI QDI QDI QDI QDI