QDI P4I848P Manual page 28

Hide thumbs Also See for P4I848P:

Table of Contents

Installation Instruction

Installation Instr

Enable keyboard password power-on function (JKB)

The mainboard provides the advanced keyboard password power-on function. Before using

this function, set JKB with pin1 & pin2 closed. Otherwise, set JKB with pin2 & pin3 closed for

disabling.

Furthermore in order to implement this function, set "POWER ON Function" to "Password"

and enter the keyboard power-on password in the "INTEGRATED PERIPHERALS" section

of the CMOS SETUP. Save and exit, then power off your system. In this case, the power

button's power-on function is disabled.

uction

Note:

1. If using this function, 5VSB line of the power supply should be

capable of delivering enough current for all the devices con

nected to the keyboard port, if not, you will be unable to power

up the system using the keyboard.

2. If you set JKB with pin2 & pin3 closed, set "POWER ON Func

tion" to BUTTON ONLY, don't set it to Password, or you'll be

unable to power up your system by the keyboard or the power

button.

3. If you encounter the above problems, clear CMOS and set

the jumper pin2 and pin3 closed to disable the function,them

power on the system by pushing the power button,and set

"power on Fuction" back to "Button Only".

Disable

JKB

1 2 3

Enable

1 2 3

QDI

Table of Contents

Show Quick Links

Table of Contents