QDI P4I848P Manual page 26

Installation Instruction Installation Instr Installation Instr Installation Instr Installation Instr
Overclocking Jumper Setting (J
Jumpers JFSB0 and JFSB1 provides users with CPU overclocking feature. The host bus
speed can be set as 100x4/133x4/166x4/200x4MHz or AUTO. If CPU FSB(front side bus) is
set as auto, the system detects the CPU FSB automatically. The table below is for your
reference.
18
"1-2": pin1 & pin2 closed
Whether or not your system can be overclocked depends on the capability of your processor
and memory. Whether the processor is bus ratio locked or unlocked should also be taken
into account. For bus ratio unlocked processor, this overclocking feature can be implemented
by setting FSB as 100x4/133x4/166x4/200x4MHz, meanwhile adjusting the bus ratio (multi-
plier) in "QDI Innovation features" in AWARD BIOS CMOS Setup and memorry.
uction uction uction uction
FSB AUTO
JFSB0 1-2
JFSB1 1-2
Warning:
Be sure your selection is right. CPU over speeding is dangerous! We
will not be responsible for any damages caused.
1
2
3
JFSB1
100MHz 133 MHz
2-3 OPEN
2-3 2-3
"2-3": pin2 & pin3 closed
1
2
3
JFSB0
166 MHz 200 MHz
OPEN 2-3
OPEN OPEN
OPEN: all pins opened
QDI QDI QDI
QDI QDI