QDI P4I848P Manual page 56

Appendix Appendix
Appendix Appendix Appendix
A. Using CBLOGO.EXE Utility (Under DOS ):
1. Copy "CBLOGO.EXE"and "AWDFLASH.EXE" from the directory \Utility located on QDI
Driver CD to your hard disk.
2. Get the BIOS file from "AWDFLASH.EXE" or Download the BIOS file from the Website
(http://www.qdigrp.com) and copy the BIOS file(xxxxxx.bin) to your hard disk.
3. Boot the system into DOS environment, Put your favor picture into BIOS file by "CBLOGO.
EXE" command. For example: CBLOGO.EXE xxxxxx.bin myphoto.bmp
4. Flash the BIOS to motherboard by "AWDFLASH.EXE". For example: AWDFLASH xxxxxx.
bin
B. Using QFlash (Under Windows ):
1.Download the QFlash Utility from the Website (http://www.qdigrp.com) or get it fromQDI
Driver CD.
2.Run QFlash program step by step, following the directions until complete it .
3.Reboot the system, you can see the new picture displayed on the screen.
48
The BIOS of the mainboard is contained inside the Flash ROM. Severe viruses such as CIH
virus are so dangerous that it may overwrite the BIOS of the mainboard. If the BIOS has been
damaged, the system will be unable to boot. We provide the following solution which protects
the system BIOS from being attacked by such viruses.
There are two choices which implements this function.
1.Set the jumper (BIOS_WP) as closed, the BIOS can not be overwritten.
2.Set the jumper (BIOS_WP) as opened, meanwhile set "Flash Write Protect" as Enabled in
CMOS Setup.In this way, the BIOS can not be overwritten, but the DMI information can be
updated.
Note:
If you require more parameters information concerning "CBLOGO.EXE",
please refer to the online help. If you don't prefer the logo displayed
on the screen during bootup, set the "Show Bootup Logo" option as
Disabled in CMOS Setup.
BIOS_ProtectEasy
QDI QDI
QDI QDI QDI