Cpu Installation Procedures - QDI P4I848P Manual

Appendix Appendix
Appendix Appendix Appendix

CPU Installation Procedures

1. Pull the lever sideways away from
the socket. Then, raise the lever up
to a 90-degree angle.
2. Look for the cut edge. The cut edge
should point towards the lever pivot.
The CPU will only fit in the correct
orientation. If the CPU is correctly
installed, the pins should be com-
pletely embedded into the socket
64
and can not be seen.
3. Hold the CPU down firmly, and then
close the lever to complete
installation.
Warning:
Overheating will seriously damage the CPU and system, always
make sure the cooling fan can work properly to protect the CPU
from overheating.
QDI QDI
QDI QDI QDI