Table of Contents
Advertisement
INSIDE OF OVEN
The oven should always be cleaned after
use when it has cooled down .
The cavity should be cleaned using a
mild detergent solution and warm water .
Suitable proprietary chemical cleaners
may be used after first consulting with
the manufacturers recommendations and
testing a small sample of the oven cavity .
Abrasive cleaning agents or scouring pads/
cloths should not be used on the cavity
surface .
NOTE: The manufacturers of this appliance
will accept no responsibility for damage
caused by chemical or abrasive cleaning .
Let the oven cool down and pay special
attention no to touch the hot heating
elements inside the oven cavity .
FITTING THE OVEN SHELVES
•
Fit the side runner frames into the ho-
les on the side walls inside the oven
(Fig . 8 .3) .
•
Slide into the guides, the shelf and the
tray (fig. 8.4).
The rack must be fitted so that the sa-
fety notch, which stops it sliding out,
faces the inside of the oven; the guard
rail shall be at the back .
•
To dismantle, operate in reverse order .
26
Guard rail
Fig . 8 .3
Stop notch
Fig . 8 .4
Hide quick links:
Advertisement
Table of Contents
