Table of Contents
Advertisement
"HI-LIGHT" DOUBLE ZONES
•
The heating element is formed of 2 coils of resistant material which reaches the wor-
king temperature quickly .
•
This zone is controlled by a continuous energy regulator switch (fig. 3.3). The heat
intensity can be regulated continuously from "0" to "12" (max) .
•
Check that the hob is clean and then switch on by turning the control knob .
•
When the hob is working, the power on indicator light will be on .
•
To turn on both zones of the double element, turn the double element knob fully
clockwise to the position
To reduce the heat of the full double element, turn its knob anticlockwise to setting "12"
or lower . Adjust the heat during cooking as necessary .
Note: if you leave the knob at the
the highest heat setting .
•
To return to using only the inner zone of the double element, first turn the knob to the
"0" (off) position (you should feel a click) and then clockwise to a setting from "1" to
"12" .
12
11
10
9
8
Fig . 3 .3
Second element
DOUBLE ZONE
Fig . 3 .4
(figs. 3.4, 3.5)
.
1
2
3
4
5
6
7
position, the full double element will remain at
DOUBLE ZONE (OVAL)
Fig . 3 .5
Second element
11
Hide quick links:
Advertisement
Table of Contents
