Kenwood CK 408/1 Instructions For Use - Installation Advice page 14

Double oven ceramic cooker
Table of Contents

Advertisement

ADVICE FOR SAFE USE OF THE
COOKTOP
Before switching on make sure that
you have the correct knob for the
hotplate chosen . It is advisable to
put the pan on the hotplate before
switching on and to take it away after
switching off .
Use cookware with flat and even bot-
toms (be careful when using cast iron
vessels) . Uneven bottoms can scratch
the glass ceramic surfaces . Be careful
that the bottom is clean and dry .
Pots with aluminium bottoms may lea-
ve silver streaks or spots on the bob .
Do not leave wet or damp lids on the bob .
The glass-ceramic surface and pans
must be clean . Carefully eliminate any
food remains (especially containing
sugar), dirt etc . with the ai d of a cle-
ansing agent .
Make sure that the handles of cookwa-
re do not stick out over the edge of the
cooker, to avoid them being knocked
over by accident . This also makes it
more difficult for children to reach the
cooking vessels .
Do not lean over the cooking zones
when they are switched on .
Do not drop heavy or sharp objects on
the glass ceramic cooktop . If the sur-
face is broken or damaged unplug the
appliance and contact the after-sales
service .
Do not put aluminium foil or plastic
objects on the cooking zones when
they are hot .
Remember that the cooking zones re-
main hot for some time after they are
switched off (about 30 mm .) .
Follow the cleaning instructions carefully .
If you note a crack in the cooktop,
switch the appliance off immedia-
tely and call the After-Sales Service.
Do not scratch the cooktop with
cutting or sharp objects.
Do not use the glass ceramic sur-
face as a work surface.
14
CLEANING
Before you begin cleaning make sure
that the appliance is switched off.
Remove any encrustation using a scraper
specific for glass ceramic surfaces.
Dust or food particles can be removed with
a damp cloth .
If you use a detergent, please make sure
that it is not abrasive or scouring .
Abrasive or scouring powders can dama-
ge the glass surface of the hob . All traces
of the cleaner have to be removed with a
damp cloth .
It is highly recommended to keep off the
hob any article which can melt: plastic,
aluminium foil, sugar, sugar syrup mixtures
etc .
If any of these products has melted on the
ceramic surface, you should remove it im-
mediately (when the surface is still hot) by
using a scraper to avoid any permanent
damage to the surface of the hob .
Avoid using any knife or sharp utensil since
these can damage the ceramic .
Do not use steel wool or an abrasive spon-
ge which could scratch the surface perma-
nently .
ATTENTION: MOST IMPORTANT!
If cleaning the glass ceramic hob using
a special tool (i.e. scraper) take extra
care to avoid damage to the seal at the
edges of the glass ceramic surface.
Fig. 3.9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents