Cleaning And Maintenance - Kenwood CK 408/1 Instructions For Use - Installation Advice

8 - CLEANING AND MAINTENANCE

GENERAL ADVICE
Before you begin cleaning, you must ensure that the appliance is switched off
•
and disconnected from the electrical power supply.
• It is advisable to clean when the appliance is cold and especially when cleaning the
enamelled parts .
• Avoid leaving alkaline or acidic substances (lemon juice, vinegar, etc .) on the surfaces .
• Avoid using cleaning products with a chlorine or acidic base .
• Do not use a steam cleaner because the moisture can get into the appliance thus
make it unsafe.
• Important: The use of suitable protective clothing/gloves is recommended when
handling or cleaning of this appliance.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven
•
door glass since they can scratch the surface, which may result in shattering of
the glass.
WARNING!
When correctly installed, your product meets all safety requirements laid down for
this type of product category. However special care should be taken around the rear
or the underneath of the appliance as these areas are not designed or intended to be
touched and may contain sharp or rough edges, that may cause injury.
Attention
The appliance gets very hot, mainly around the cooking areas. It is very important
that children are not left alone in the kitchen when you are cooking.
Do not use a steam cleaner because the moisture can get into the appliance thus
make it unsafe.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door
glass since they can scratch the surface, which may result in shattering of the
glass.
23