Table of Contents
Advertisement
User Manual
5.- Ready to begin
5.1.- How to start
Switch the TV on as well as all the additional equipment that may be
connected to the system.
Switch the satellite receiver on, by pressing the ON button (
receiver or on the remote control.
Select the TV or Radio mode using the
The TV mode channels can be identified by the
Radio mode channels can be identified by the
(The default mode is the TV mode).
5.2.- How to select TV or RADIO channels
The TV/Radio channels can be selected using both the remote control and
the buttons on the receiver.
Press the
button to select the desired service mode (TV chan-
nels or radio channels).
When you can see the channel, press the PG+ button to select the follo-
wing channel, or the PG- button to select the previous channel.
The selected channels will appear straight away with the corresponding
information at the bottom of the screen.
By pressing the i button, a window appears on the screen with informa-
tion about the programme you are watching.
5.3.- How to adjust the volume
The volume can be adjusted using the remote control.
To increase the volume, press the
press the
button on thre remote control.
The volume levels can be seen on the indicator that appears
onscreen.
) on the
button.
symbol and the
button.
button, and to decrease it,
37
"RSD - 7297"
Advertisement
Table of Contents
