Bhapter 1
Bhapter 1
Bhapter 1
Bhapter 1
Bhapter 1
2.7 PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI
or Personal Computer Interconnect,is a system which allows
I/O devices to operate at speeds nearing the speed of the
CPU itself when communicating with its own special
components. This section covers some very technical items
and it is strongly recommended that only experienced uses
make any changes to the default settings.
◎ ◎ ◎ ◎ ◎ Figure 7. PnP/PCI Configurations
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
Reset Configuration Data
Resources Controlled By
IRQ Resources
PCI/VGA Palette Snoop
Assign IRQ For USB
←→↑↓: Move
F1:General Help
F7:Optimized Defaults
PnP/PCI Configurations
Disabled
Auto(ESCD)
Press Enter
Disabled
Enabled
Enter:Select
+/-/PU/PD:Value
F5:Previous Values
1 - 1 8
1 - 1 8
1 - 1 8
1 - 1 8
1 - 1 8
Item Help
Menu Level
When resources
are controlled
manually, assign
each system
interrupt a type,
depending on the
type of device
using the
interrupt
F10:Save
ESC:Exit
F6:Fail-Safe Defaults
BIOS Settp
BIOS Settp
BIOS Settp
BIOS Settp
BIOS Settp