Apic Mode - Acorp 4S845AL User Manual

Bhapter 1 Bhapter 1
Bhapter 1 Bhapter 1 Bhapter 1
Setup (default)

APIC Mode

The Choices: Enabled(default), Disabled.
Note 2:
If you run test software under DOS Mode, please
adjust default value otherwise this option will be
shown hung up. The default setting is Disabled.
MPS Version Control For OS
The Choices: 1.4(default), 1.1.
OS Select For DRAM >64MB
Select the operating system that is running with greater
than 64MB of RAM on the system.
The Choices: Non-OS2(default), OS2
Report No FDD For Window 95
No (default)
Yes
Full Screen Logo Show
The Choices: Disabled(default), Enabled.
EPA / (H/W Monitor) Show
The Choices: Disabled(default), Enabled.
The system will boot, but
access to Setup will be denied
if the correct password is not
entered in prompt.
Assign IRQ6 For FDD.
FDD Detect IRQ6
Automatically.
1 - 1 2 1 - 1 2 1 - 1 2 1 - 1 2 1 - 1 2
BIOS Settp BIOS Settp
BIOS Settp BIOS Settp BIOS Settp