Before you proceed:
Take note of the following precautions before you install device
on motherboard:
First: before you boot
i. Please check up Power supply on page 1-10.
ii. Check up DRAM Memory module on page 1-2.
iii. Check up AGP card is 1.5V/4X device on page 1-2.
Second: Boot your system
i. Check up CPU Frequency on page 2-34.
Third: Using PS/2 Sound Card & Game Port device
i. Please see detail content on page 1-19.
Fourth: Running test software under DOS mode
i. Please check up APIC Mode on page 2-13.
Fifth: Using wheel device of Mouse under S3(STR) mode
i. Please check up ACPI Suspend Type on page 2-25.