Acorp 4S845AL User Manual page 41

Bhapter 1 Bhapter 1
Bhapter 1 Bhapter 1 Bhapter 1
Boot Up NumLock Status
Select power on state for Numlock.
On (default)
Off
Gate A20 Option
Select if chipset or keyboard controller should control
Gate A20.
Normal
Fast (default)
Typematic Rate Setting
Enabled
Disabled (default)
Typematic Rate (Char/Sec)
Range between 6(default) and 30 characters per second.
This option controls the speed of repeating keystrokes.
Typematic Delay (Msec)
This option sets the time interval for displaying the first
and the second characters.
The Choices: 250(default), 500, 750, 1000.
Security Option
This category allows you to limit access to the system and
Setup,or just to Setup.
System
Numpad is number keys.
Numpad is arrow keys.
A pin in the keyboard
controller controls Gate A20.
Lets chipset control Gate A20.
Enabled this option to adjust
the keystroke repeat rate.
Disabled.
The system will not boot and
access to Setup will be denied
if the correct password is not
entered in prompt.
1 - 1 1 1 - 1 1 1 - 1 1
1 - 1 1 1 - 1 1
BIOS Settp BIOS Settp
BIOS Settp BIOS Settp BIOS Settp