Acorp 4S845AL User Manual page 40

Bhapter 1 Bhapter 1
Bhapter 1 Bhapter 1 Bhapter 1
CPU L1 & L2 Cache
This fields allow you to Enable or Disable the CPU's
"Level 1 & Level 2" cache. Caching allows better
performance.
Enabled (default)
Disabled
Quick Power On Self Test
This category speeds up Power on self-Test(POST) after
you power up the computer. If it is set to Enable, BIOS
will shorten or skip some check items during POST.
Enabled (default)
Disabled
First/Secondary/Third Boot Device
This BIOS attempts to load the operating system from
the devices in the sequence selected in these items.
The Choices: Floppy, LS120, HDD-0, SCSI, CDROM,
HDD-1, HDD-2, HDD-3, ZIP100, USB-FDD, USB-ZIP,
USB-CDROM, USB-HDD, LAN, Disabled.
Boot Other Device
The Choices: Enabled(default), Disabled.
Swap Floppy Drive
If the system has two floppy drives, you can swap the
logical drive name assignments.
The Choices: Disabled(default), Enabled.
Boot Up Floppy Seek
Seek disk drives during boot up. Disabled speeds boot-up.
The Choices: Enabled(default), Disabled.
Enabled cache.
Disabled cache.
Enabled quick POST.
Normal POST.
1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1
BIOS Settp BIOS Settp
BIOS Settp BIOS Settp BIOS Settp