Subscribe to Our Youtube Channel
Related Manuals for ACME Warrior Scan 50 LED-SC50C
Summary of Contents for ACME Warrior Scan 50 LED-SC50C
- Page 1 WARRIOR SCAN 50 LED-SC50C Широкий ассортимент оборудования ACME на www.maxlight.ru User Guide Innovation, Quality, Performance Professional Entertainment Technology...
- Page 2 EC Declaration of Conformity We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 89/336/EEC. EN55014-2: 1997 A1: 2001, EN61000-4-2: 1995; EN61000-4-3: 2002; EN61000-4-4: 1995;...
-
Page 3: Table Of Contents
2. The motor’s drive IC on the PCB might be out of condition 7. Fixture Cleaning The cleaning of internal and external optical lenses and/or mirrors must be carried out TABLE OF CONTENTS periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics. -
Page 4: Safety Instruction
1. Safety Instruction 5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+), Pin 4/Pin 5: Not used. Please read carefully the instruction, which includes important information 5. Update Software about the installation, usage and maintenance. WARNING Download update file from our web site, follow the user manual of IU-01 to update Please keep this User Guide for future consultation. -
Page 5: Technical Specification
4.5 DMX512 Connection The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged. Caution There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your nearest dealer. -
Page 6: How To Set The Unit
Voltage: 230V/50Hz 8 channel mode: Power consumption: 105W Light source: 1×50W LED Dimension: 262X212X474 mm Weight: 7.4 kg 3. How To Set The Unit 3.1 Control panel Display To show the various menus and the selected functions DMX input present MASTER Master Mode SLAVE... - Page 7 4.4 DMX 512 Configuration 3.2 Main Function 7 channel mode: To select any of the given functions, press the MENU button up to when the required one is showing on the display. Select the function by ENTER button and the display will blink. Use DOWN and UP button to change the mode.
- Page 8 LED will flash to the music. The other units will have to set in slave mode and select (normal) or (2 light show) mode, Their DMX cables plugged into the DMX input jacks (daisy chain) and the slave led lights will constantly on. 2-light show (slave mode), means the unit works normally and...
-
Page 9: How To Control The Unit
Press the MENU button to show on the display. Press the ENTER button and the DMX 512 Address Setting display will show the number of working hours of the unit. To go back to the functions press the MENU button again. Hold and press the MENU button about one second or wait for one Press the MENU button to show on the display. - Page 10 setup, to go back to the functions without any change press the MENU button again. Hold (display normal), It will automatically store after 8 seconds. Or press the ENTER button and press the MENU button about one second or wait for one minute to exit the menu mode. again return to the mode (display inversion).
Need help?
Do you have a question about the Warrior Scan 50 LED-SC50C and is the answer not in the manual?
Questions and answers