Subscribe to Our Youtube Channel
Related Manuals for ACME Dragon Scan 50 LED-SC50B
Summary of Contents for ACME Dragon Scan 50 LED-SC50B
- Page 1 DRAGON SCAN 50 LED-SC50B Широкий ассортимент оборудования ACME User Guide на www.maxlight.ru Innovation, Quality, Performance Professional Entertainment Technology...
- Page 2 EC Declaration of Conformity We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 89/336/EEC. EN55014-2: 1997 A1: 2001, EN61000-4-2: 1995; EN61000-4-3: 2002; EN61000-4-4: 1995;...
-
Page 3: Table Of Contents
2. The motor’s drive IC on the PCB might be out of condition 7. Fixture Cleaning The cleaning of internal and external optical lenses and/or mirrors must be carried out TABLE OF CONTENTS periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics. -
Page 4: Safety Instruction
1. Safety Instruction 5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+), Pin 4/Pin 5: Not used. Please read carefully the instruction, which includes important information 5. Update Software about the installation, usage and maintenance. WARNING Download update file from our web site, follow the user manual of IU-01 to update Please keep this User Guide for future consultation. -
Page 5: Technical Specification
4.5 DMX512 Connection The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged. Caution There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your nearest dealer. -
Page 6: How To Set The Unit
Voltage: 230V/50Hz 11 channel mode: Power consumption: 100W Light source: 1×50W LED Dimension: 262X212X474 mm Weight: 7.8 kg 3. How To Set The Unit 3.1 Control panel Display To show the various menus and the selected functions DMX input present MASTER Master Mode SLAVE... - Page 7 4.4 DMX 512 Configuration 3.2 Main Function 8 channel mode: To select any of the given functions, press the MENU button up to when the required one is showing on the display. Select the function by ENTER button and the display will blink. Use DOWN and UP button to change the mode.
- Page 8 (random show) or (show 1) or… or (show 12) mode. Its DMX input jack will have nothing plugged into it, and Its master LED will be constantly on and sound LED will flash to the music. The other units will have to set in slave mode and select (normal) or (2 light show) mode, Their DMX cables plugged into the DMX...
-
Page 9: How To Control The Unit
Fixture Hours DMX 512 Address Setting Press the MENU button to show on the display. Press the ENTER button and the Press the MENU button to show on the display. Press the ENTER button and the display will show the number of working hours of the unit. To go back to the functions press display will blink. - Page 10 setup, to go back to the functions without any change press the MENU button again. Hold (display normal), It will automatically store after 8 seconds. Or press the ENTER button and press the MENU button about one second or wait for one minute to exit the menu mode. again return to the mode (display inversion).
Need help?
Do you have a question about the Dragon Scan 50 LED-SC50B and is the answer not in the manual?
Questions and answers