Table of Contents
Advertisement
Hardware Installations and Upgrades
Installing the LCP Module
1. Remove the front video and USB module. For instructions, see
Removing the Front Video and
USB
Module.
2. Secure the front USB header to the module with two screws as shown (see letter A).
3. Insert the LCP module into chassis (see letter B).
4. Secure the LCP module to chassis with two screws (see letter C).
5. Install the LCP and USB cables to the server board as shown (see letter D).
Figure 80. Installing the LCP Module
®
Intel
Server System R2000LH2/LT2 Service Guide
55
Advertisement
Table of Contents
Need help?
Do you have a question about the Relion 2804e and is the answer not in the manual?