Installation And Start Up - Bicker UPSI-2403 User Manual

5 Installation and Start up

Connections
UPSI-2403
DC UPS System
24 VDC / 6 A
N o t e s
The DC UPS UPSI-2403 must be mounted horizontally.
Ensure there is sufficient convection during operation.
All connector cables must be dimensioned for the input current of the
UPSI-2403 (6.7 A) and an according additional protection must be provided and
fused. The recommended cross section for the connector cables is 1.5 mm
Before switching on the unit, make sure all connections are correct.
Both fuses (10 A Mini®Fuse) must be engaged.
22
IN+ IN-
5
4
IN +
IN –
3
OUT –
2
OUT +
1
Status
GND
IN+
UPSI | Control Center
The UPS software is available for download
at www.bicker.de. In addtion to the current
operating parameters, the software informs
about the expected „battery lifetime", too.
User's Manual UPSI-2403
USB
2 .