Userinterface Settings - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set
Contents

UserInterface settings

UserInterface Language
Select the language to be used in menus and messages on the screen and Touch controller.
The default language is English.
Requires user role: USER
Value space: <English/ChineseSimplified/ChineseTraditional/Catalan/Czech/Danish/
Dutch/Finnish/French/German/Hungarian/Italian/Japanese/Korean/Norwegian/Polish/
PortugueseBrazilian/Russian/Spanish/Swedish/Turkish/Arabic/Hebrew>
Range: Select a language from the list.
UserInterface Language: English
Example:
UserInterface OSD EncryptionIndicator
Define for how long the encryption indicator (a padlock) will be shown on screen. The setting
applies to both encrypted and non-encrypted calls, i.e. both to secure and non-secure
conferences. The icon for encrypted calls is a locked padlock, and the icon for non-encrypted
calls is a crossed out locked padlock.
Requires user role: ADMIN
Value space: <Auto/AlwaysOn/AlwaysOff>
Auto: If the Conference Encryption Mode setting is set to BestEffort and the call is
encrypted, the encryption indicator is shown during the first seconds of a call. If the
Conference Encryption Mode setting is set to BestEffort and the call is non-encrypted, the
crossed out encryption indicator is shown during the entire call. If the Conference Encryption
Mode setting is NOT set to BestEffort, the encryption indicator is not shown at all.
AlwaysOn: The encryption indicator is displayed on screen during the entire call. This applies
to both encrypted and non-encrypted calls for all Conference Encryption Mode settings.
AlwaysOff: The encryption indicator is never displayed on screen. This applies to both
encrypted and non-encrypted calls for all Conference Encryption Mode settings.
UserInterface OSD EncryptionIndicator: Auto
Example:
UserInterface OSD LanguageSelection
Not applicable in this version.
D15106.04 SX10 Quick Set Administrator Guide TC7.3, JULY 2015.
Introduction Web interface System settings System settings
UserInterface OSD Output
Define on which monitor the on-screen menus, information and icons should be displayed. The
system supports only one monitor, so this value is fixed and cannot be changed.
Requires user role: ADMIN
Value space: <1>
UserInterface Wallpaper
Select a background image (wallpaper) for the video screen when idle.
You may upload a custom wallpaper to the video system using the web interface. The following
file formats are supported: BMP, GIF, JPEG, PNG. The maximum file size is 2 MByte.
Requires user role: USER
Value space: <None/Custom>
None: There is no background image on the screen.
Custom: Use the custom wallpaper as background image on the screen. If no custom
wallpaper is uploaded to the system, the setting will revert to the default value.
UserInterface Wallpaper: None
Example:
UserInterface TouchPanel DefaultPanel
Define what (contact list, meeting list, or dial pad) the Touch controller will display on wake up.
Requires user role: USER
Value space: <None/LastUsed/ContactList/MeetingList/Dialpad>
None: None of the below options will appear as default on the Touch controller.
LastUsed: The last used (contact list, meeting list, or dial pad) will appear as default on the
Touch controller.
ContactList: The contact list (favorites, directory and history) will appear as default on the
Touch controller.
MeetingList: The list of scheduled meetings will appear as default on the Touch controller.
DialPad: The dial pad will appear as default on the Touch controller.
UserInterface TouchPanel DefaultPanel: None
Example:
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
96
Administrator Guide
Setting passwords Appendices