Cisco TelePresence SX10 Quick Set Administrator's Manual page 64

Cisco TelePresence SX10 Quick Set
Contents
Conference [1..1] MaxTransmitCallRate
Specify the maximum transmit bit rate to be used when placing or receiving calls. Note that this
is the maximum bit rate for each individual call; use the Conference MaxTotalTransmitCallRate
setting to set the aggregated maximum for all simultaneous active calls.
Requires user role: ADMIN
Value space: <64..3072>
Range: Select a value between 64 and 3072 kbps.
Conference 1 MaxTransmitCallRate: 3072
Example:
Conference [1..1] MaxReceiveCallRate
Specify the maximum receive bit rate to be used when placing or receiving calls. Note that this
is the maximum bit rate for each individual call; use the Conference MaxTotalReceiveCallRate
setting to set the aggregated maximum for all simultaneous active calls.
Requires user role: ADMIN
Value space: <64..3072>
Range: Select a value between 64 and 3072 kbps.
Conference 1 MaxReceiveCallRate: 3072
Example:
Conference [1..1] MaxTotalTransmitCallRate
Specify the maximum overall transmit bit rate allowed. This product does not support multiple
simultaneous calls, so the total transmit call rate will be the same as the transmit bit rate for one
call (ref. Conference MaxTransmitCallRate setting).
Requires user role: ADMIN
Value space: <64..3072>
Range: Select a value between 64 and 3072.
Conference 1 MaxTotalTransmitCallRate: 3072
Example:
D15106.04 SX10 Quick Set Administrator Guide TC7.3, JULY 2015.
Introduction Web interface System settings System settings
Conference [1..1] MaxTotalReceiveCallRate
Specify the maximum overall receive bit rate allowed. This product does not support multiple
simultaneous calls, so the total receive call rate will be the same as the receive bit rate for one
call (ref. Conference MaxReceiveCallRate setting).
Requires user role: ADMIN
Value space: <64..3072>
Range: Select a value between 64 and 3072.
Conference 1 MaxTotalReceiveCallRate: 3072
Example:
Conference [1..1] VideoBandwidth Mode
Set the conference video bandwidth mode.
Requires user role: ADMIN
Value space: <Dynamic/Static>
Dynamic: The available transmit bandwidth for the video channels are distributed among the
currently active channels. If there is no presentation, the main video channels will use the
bandwidth of the presentation channel.
Static: The available transmit bandwidth is assigned to each video channel, even if it is not
active.
Conference 1 VideoBandwidth Mode: Dynamic
Example:
Conference [1..1] VideoBandwidth MainChannel Weight
The available transmit video bandwidth is distributed on the main channel and presentation
channel according to "MainChannel Weight" and "PresentationChannel Weight". If the main
channel weight is 2 and the presentation channel weight is 1, then the main channel will use
twice as much bandwidth as the presentation channel.
Requires user role: ADMIN
Value space: <1..10>
Range: 1 to 10.
Conference 1 VideoBandwidth MainChannel Weight: 5
Example:
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
64
Administrator Guide
Setting passwords Appendices