Cisco TelePresence SX10 Quick Set Administrator's Manual page 74

Cisco TelePresence SX10 Quick Set
Contents
Network [1..1] VLAN Voice Mode
Set the VLAN voice mode. The VLAN Voice Mode will be set to Auto automatically if you have
Cisco UCM (Cisco Unified Communications Manager) as provisioning infrastructure. Note that
Auto mode will NOT work if the NetworkServices CDP Mode setting is Off.
Requires user role: ADMIN
Value space: <Auto/Manual/Off>
Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If
CDP is not available, VLAN is not enabled.
Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId setting. If CDP is
available, the manually set value will be overruled by the value assigned by CDP.
Off: VLAN is not enabled.
Network 1 VLAN Voice Mode: Auto
Example:
Network [1..1] VLAN Voice VlanId
Set the VLAN voice ID. This setting will only take effect if VLAN Voice Mode is set to Manual.
Requires user role: ADMIN
Value space: <1..4094>
Range: Select a value between 1 and 4094.
Network 1 VLAN Voice VlanId: 1
Example:
D15106.04 SX10 Quick Set Administrator Guide TC7.3, JULY 2015.
Introduction Web interface System settings System settings
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
74
Administrator Guide
Setting passwords Appendices