Cisco TelePresence SX10 Quick Set Administrator's Manual page 39

Cisco TelePresence SX10 Quick Set
Contents
Managing the list of trusted
certificate authorities
(page 2 of 2)
As from software version TC7.2, the signature of an
audit server is verified using the same CA list as other
servers/clients.
Setting up secure audit logging
Audit logging records all sign in activity and configuration
changes on your video system.
Audit logging is disabled by default, but you can enable it
using the Security > Audit > Logging > Mode
In ExternalSecure audit logging mode the video system
sends encrypted audit logs to an external audit server
(syslog server), which identity must be verified by a signed
certificate.
If the audit server cannot be authenticated, the logs will not
be sent.
Always upload the list of trusted certificate authorities
before enabling secure audit logging.
D15106.04 SX10 Quick Set Administrator Guide TC7.3, JULY 2015.
Introduction Web interface Web interface
Navigate to: Configuration > Security: CAs tab / Configuration > System Configuration
setting.
Enable secure audit logging
i. Go to the
page and choose the
category.
System settings
iii
ii
i
System Configuration ii. Enter the
Security server. If you choose Manual
PortAssignment,
enter a
audit server. Click
changes to take effect.
39
Setting passwords
Address of the audit iii. Choose ExternalSecure from the
Logging Mode
you must also Click
Port number for the effect.
Save for the
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
drop-down list.
Save for the change to take