Accessing The Web Interface - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set
Contents

Accessing the web interface

The web interface provides full configuration access to your
video conference system.
You can connect from a computer and administer the system
remotely.
In this chapter you will find information how to use the web
interface for system configuration and maintenance.
We recommend that you use the latest release of one of the
major web browsers.
D15106.04 SX10 Quick Set Administrator Guide TC7.3, JULY 2015.
Introduction Web interface Web interface
1. Connect to the video system
Open a web browser and enter the IP address of
the video system in the address bar.
How to find the IP address
Remote control: Navigate to the contact
information in the upper, left corner of
the screen and press OK. Then open the
Settings
Touch controller: Tap the contact
information in the upper left corner
of the Touch controller and open the
Settings
Information.
System settings
menu.
menu. Then tap System
2. Sign in
Enter the user name and password for your
video system and click
11
Setting passwords
Sign In.
The system is delivered with a default
user named admin with no password.
Leave the Password field blank when
signing in for the first time.
It is mandatory to set a password for
the admin user, see the next page.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
Signing out
Hover the mouse
over the user
name and choose
Sign out from the
drop-down list.