Cisco TelePresence SX10 Quick Set Administrator's Manual page 65

Cisco TelePresence SX10 Quick Set
Contents
Conference [1..1] VideoBandwidth PresentationChannel Weight
The available transmit video bandwidth is distributed on the main channel and presentation
channel according to "MainChannel Weight" and "PresentationChannel Weight". If the main
channel weight is 2 and the presentation channel weight is 1, then the main channel will use
twice as much bandwidth as the presentation channel.
Requires user role: ADMIN
Value space: <1..10>
Range: 1 to 10.
Conference 1 VideoBandwidth PresentationChannel Weight: 2
Example:
Conference [1..1] Presentation RelayQuality
Not applicable in this version.
Conference [1..1] Presentation OnPlacedOnHold
Define whether or not to continue sharing a presentation after the remote site has put you on
hold.
Requires user role: ADMIN
Value space: <Stop/NoAction>
Stop: The video system stops the presentation sharing when the remote site puts you on
hold. The presentation will not continue when the call is resumed.
NoAction: The video system will not stop the presentation sharing when put on hold. The
presentation will not be shared while you are on hold, but it will continue automatically when
the call is resumed.
Conference 1 Presentation OnPlacedOnHold: NoAction
Example:
D15106.04 SX10 Quick Set Administrator Guide TC7.3, JULY 2015.
Introduction Web interface System settings System settings
Conference [1..1] Multipoint Mode
Define how the video system handles multiparty video conferences. The value is fixed to
CUCMMediaResourceGroupList because such conferences are only supported using the
CUCM conference bridge.
Conferences are only supported when the video system is registered to a Cisco Unified
Communications Manager (CUCM) (version 8.6.2 or newer with an appropriate device
package); it is not supported when registered to a Cisco TelePresence Video Communication
Server (VCS).
Requires user role: ADMIN
Value space: <CUCMMediaResourceGroupList>
CUCMMediaResourceGroupList: Multiparty conferences (ad hoc conferences) will be hosted
by the CUCM configured conference bridge. This setting is provisioned by CUCM in a CUCM
environment and should never be set manually by the user.
Conference 1 Multipoint Mode: CUCMMediaResourceGroupList
Example:
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
65
Administrator Guide
Setting passwords Appendices