Wall Mounting - HIKVISION DS-2CC5281P User Manual

High-definition Vandal-proof Dome Camera· User Manual
Remove the protection film after the installation is completed in
case of the image problem caused by the scrape of the lower
dome.

2.3 Wall Mounting

Note:
Please make sure that the wall is strong enough to withstand three
times the weight of the camera.
Steps:
1. Drill four expansion screw holes on the wall.
2. Secure the mount to the wall w ith the expansion screws.
3. Insert the adapter ring to the mount.
Figure 2-11 Install the Mount and the Adapter Ring
4. Loosen the screws to open the lower dome.
5. Remove the black liner.
6. Secure the camera to the adapter ring.
17