Sync Setting - HIKVISION DS-2CC5281P User Manual

High-definition Vandal-proof Dome Camera· User Manual
Steps:
1. Move the cursor to POS, and press the menu button to enter
the position setting interface.
2. Set the menu button up/down/left/right to position the camera
ID.
3. Press the button to save the position and exit.

3.13 SYNC Setting

Both internal and line lock synchronization are available.
Note:
Only the camera which supports AC 24 V power has line lock
synchronization.
If 12V DC power supply is applied, SYNC mode is internal

synchronization and it is not adjustable.
If 24V AC power supply is applied, you can select either

internal or line lock synchronization.
CAMERA ID
ABCDEFGHIJKLMNOPQRSTUV
WXYZ0123456789-!"#$%&'
()_` , ￥:;<= >?@\^*.x+/
← → ↑ ↓ CLR POS
RETURN
Figure 3-14 CAMERA ID
41