High-definition Vandal-proof Dome Camera· User Manual
3.8 Motion Detection Setting
There are two kinds of MOTION DET panes: BLOCK DISP and
MONITOR AREA. Two panes can take effect simultaneously.
BLOCK DISP
Steps:
1. Move the cursor to MOTION DET, and select ON and press the
menu button to enter the submenu.
2. Position the cursor on DETECT SENSE, and set the menu
button left/right to adjust the sensitivity level. 0 to 127 are
selectable.
3. Position the cursor on BLOCK DISP, and set the menu button
left/right to select ENABLE.
4. Press the menu button to enter the setup interface of the
detection panes.
5. Select ON to enable BLOCK DISP.
6. Move the cursor to MONITOR AREA and select ON.
ATR
LUMINANCE
CONTRAST
RETURN
Figure 3-8 ATR
33
LOW
LOW