Camera Id Setting - HIKVISION DS-2CC5281P User Manual

High-definition Vandal-proof Dome Camera· User Manual

3.12 Camera ID Setting

On Camera ID submenu, you can customize the camera ID. It
also allows you to adjust the camera ID position on the monitor
screen. This series of camera supports up to 52 characters.
Select OFF to disable the Camera ID.

Select ON to enable the Camera ID.

Customizing the camera ID
Steps:
1. Set it to ON, and press the menu button to enter the submenu.
2. Set the menu button up/down/left/right to position the cursor
on the character you want.
3. Press menu button to confirm your selection. The selected
character displays on the screen.
4. Repeat the steps 1 ~step 3 to select other characters.
Modifying the camera ID
Steps:
1. Position the cursor on one of the arrows.
2. Press the menu button to position the cursor on the character
that needs to be modified.
3. Select one of the other characters to replace it.
Clearing the camera ID
Steps:
1. Position the cursor on CLR.
2. Press the menu button to clear the characters.
Positioning the camera ID
40