Side Conduit Cabling - HIKVISION DS-2CC5281P User Manual

High-definition Vandal-proof Dome Camera· User Manual
11. Remove the protection film softly to complete the installation.
Note:
Remove the protection film after the installation is completed in
case of the image problem caused by the scrape of the lower
dome.

2.4 Side Conduit Cabling

There are two cabling methods selectable for this series of camera.
One is to route the cable through the ceiling, and the other is to
route the cable though the side conduit.
Steps:
1. Unscrew the water-proof plug shown below.
Figure 2-15 Unscrew the Water-proof Plug
2. Route the power/video cables through the water-proof plug to
the conduit.
20