Table of Contents
Advertisement
A+ SERVER 2022TG-HTRF/HIBQRF User's Manual
� IDE Confi guration
On Chip SATA Channel
This setting allows you to Enable or Disable the OnChip SATA channel.
On Chip SATA Type
Use this setting to set the On Chip SATA type. Options
include Native IDE, RAID, AMD_AHCI and Legacy IDE.
SATA IDE Combined Mode
This setting allows you to Enable or Disable the SATA IDE combined mode.
PATA Channel Confi guration
This allows you to set PATA channel confi guration. Options include SATA as
Primary or SATA as secondary.
� Primary/Secondary/Third/Fourth IDE Master/Slave
LBA/Large Mode
LBA (Logical Block Addressing) is a method of addressing data on a
disk drive. The options are Disabled and Auto.
Block (Multi-Sector Transfer)
Block mode boosts IDE drive performance by increasing the amount of data
transferred. Only 512 bytes of data can be transferred per interrupt if
block mode is not used. Block mode allows transfers of up to 64 KB per
interrupt.
Select "Disabled" to allow the data to be transferred from and to the
device one sector at a time. Select "Auto" to allows the data transfer from
and to the device occur multiple sectors at a time if the device supports it.
The options are Auto and Disabled.
7-8
Advertisement
Table of Contents
