Drive Tray
The drives are mounted in drive carriers to simplify their installation and removal
from the chassis. These carriers also help promote proper airfl ow for the drive
bays.
!
Warning: Except for short periods of time while swapping hard drives,
do not operate the server with the hard drives empty.
Figure 6-18. Removing Dummy Drive from Tray
Installing a Drive into the Hard Drive Tray
1. Remove the screws (2) holding connecting the drive tray the carrier.
2. Remove the tray from the carrier.
Figure 6-17. Chassis Drive Tray
1
1
6-17
Chapter 6: Advanced Chassis Setup
Dummy Drive
1
1