4. Return the motherboard drawer to the closed position in the chassis.
Add-on Card/Expansion Slot Setup
The SC827 chassis includes I/O slots for add-on cards and expansion cards. Each
side supports one low profi le/half length add-on card for a total of four per chassis,
one per drawer.
Installing Add-on Cards
1. Disconnect the power supply, lay the chassis on a fl at surface, and open the
chassis cover.
2. Pull open the add-on card slot clip in the rear of the chassis.
3. Slide the temporary PCI slot shield toward the slot clip and remove the
temporary shield from the chassis.
PCI Slot Shield
4. Connect the add-on card to the riser card.
5. Secure the riser card to the motherboard tray using the riser card screw.
Figure 6-13. I/O Shield Placement
6-13
Chapter 6: Advanced Chassis Setup
Add-on Card Slot Clip