Table of Contents
Advertisement
1
Overview
This
chapter
SERVER 2022TG-HTRF/HIBQRF up and running. Following these steps in the
order given should enable you to have the system operational within a minimum
amount of time. This quick setup assumes that your system has come to you with
the processors and memory preinstalled. If your system is not already fully
integrated with a serverboard, processors, system memory etc., please turn to the
chapter or section noted in each step for details on installing specifi c components.
2
Unpacking the System
You should inspect the box the A+ SERVER 2022TG-HTRF/HIBQRF was shipped
in and note if it was damaged in any way. If the server itself shows damage you
should fi le a damage claim with the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the A+
SERVER 2022TG-HTRF/HIBQRF. It should be situated in a clean, dust-free area
that is well ventilated. Avoid areas where heat, electrical noise and
electromagnetic fi elds are generated. You will also need it placed near a
grounded power outlet. Read the Rack and Server Precautions in the next
section.
3
Preparing for Setup
The box the A+ SERVER 2022TG-HTRF/HIBQRF was shipped in should include
two sets of rail assemblies, two rail mounting brackets and the mounting screws
you will need to install the system into the rack. Follow the steps in the order
given to complete the installation process in a minimum amount of time. Please
read this section in its entirety before you begin the installation procedure outlined
in the sections that follow.
Choosing a Setup Location
Leave enough clearance in front of the rack to enable you to open the front
door completely (~25 inches) and approximately 30 inches of clearance in the
back of the rack to allow for suffi cient airfl ow and ease in servicing.
Chapter 2
Server Installation
provides
a
quick
Chapter 2: Server Installation
setup
checklist
2-1
to
get
your
A+
Advertisement
Table of Contents
