Table of Contents
Advertisement
LANCOM WLC series
Chapter 4: Configuring the WLAN Controller
4.2.7
Options for the WLAN Controller
The 'Options' area in the WLAN Controller configuration is used to define noti-
fications in case of events and to set various default values.
Event notification
Notification can take place via SYSLOG or e-mail. You can define the following
parameters:
74
IP address
IP address of the RADIUS server that is communicated to the AP in order
for it to reach the RADIUS server. If no value is entered the controller's IP
address is taken as default.
Possible values:
Valid IP address
Default:
Blank
Port
Port number of the RADIUS server that is communicated to the AP in order
for it to reach the RADIUS server. The port must agree with the value con-
figured in the RADIUS server. This value will be ignored if no IP address is
configured as the controller itself will be used as the RADIUS server.
Possible values:
Valid port number, generally 1812 for access management and 1813
for account management.
Default:
0
Secret
Password for the RADIUS service. The key (secret) must agree with the
value configured in the RADIUS server. This value will be ignored if no IP
address is configured as the controller itself will be used as the RADIUS
server.
Possible values:
Maximum 31 ASCII characters.
Default:
Blank
Advertisement
Table of Contents
