Lancom WLC-4006 Manual page 27

LANCOM WLC series
Chapter 2: Installation
µ
AP status Provides information on the operational state of the device and the connected
(LANCOM
Access Point. The AP status display can show the following:
WLC-4006
only)
Red
Red
Green/
orange
Green
¸
Uplink Provide information on the connection to the WAN and to the LAN. The WAN
LED is only active when the uplink port is configured as a DSL interface. The
Uplink display can show the following:
Off
Green
Green
Green
Green
Green
Red
26
On (permanently) The LANCOM WLAN Controller is not yet operational;
one of the following elements is missing:
Blinking At least one of the expected Access Points is missing.
Blinking At least one new Access Point
On (permanently) At least one active access point is connected and
authenticated; no new and no missing Access Point.
Left LED (WAN)
No active WAN connection
has been established
Blinking Connection establishment
Flashing Connection establishment:
First connection
Inverse flashing Connection establishment:
Other connections
On (perma- Connection established
nently)
Flickering
On (perma- The last connection request
nently) failed. Error status is deleted
when a connection is made
or when it is deleted in
LANmonitor.
Root certificate
Device certificate
Current time
Random number for the DTLS encryption
Right LED
No connection
Connection established
Data traffic (send or receive)