Table of Contents
Advertisement
LANCOM WLC series
Chapter 4: Configuring the WLAN Controller
Using the right-hand mouse key, a context menu can be opened for the Access
Points and the following commands are available:
112
Active WLAN networks with the logged-on WLAN clients and the descrip-
tor of the Access Points that the WLAN clients are associated with.
Display of new Access Points with IP and MAC address
Display of missing Access Points with IP and MAC address
Display of managed Access Points with IP and MAC address, the utilized
frequency band and channel
Assign new Access Point to profile
Enables a new Access Point to be allocated to a profile and accepted into
the WLAN infrastructure ('Access point acceptance via LANmonitor').
Disconnect Access Point
Breaks the connection between Access Point and WLAN Controller. The
Access Point then carries out a new search for a suitable WLAN Controller.
This command can be used after a backup event to disconnect Access
Advertisement
Table of Contents
