Table of Contents
Advertisement
To use the station table, it is imperative that the RADIUS server is activated in
the WLAN Controller. As an alternative, requests can be forwarded to another
RADIUS server. More information on RADIUS is available under 'RADIUS'.
For every logical WLAN in which WLAN clients are authenticated by RADIUS,
the MAC check has to be activated.
LANconfig: WLAN Controller
WEBconfig: LCOS menu tree
MAC address
MAC address of the WLAN client for this entry.
Possible values:
Valid MAC address
Default:
Blank
Name
You can enter any name you wish and a comment for any WLAN client.
This enables you to assign MAC addresses more easily to specific stations
or users.
Possible values:
Max. 32 characters
Default:
Blank
Passphrase
Here you may enter a separate passphrase for each physical address (MAC
address) that is used in a 802.11i/WPA/AES-PSK-secured network. If no
separate passphrase is specified for this MAC address, the passphrases
Chapter 4: Configuring the WLAN Controller
Stations
Stations
Setup
WLAN management
LANCOM WLC series
Access list
71
Advertisement
Table of Contents
