Lancom WLC-4006 Manual page 42

Wlan controller
Hide thumbs Also See for WLC-4006:
Table of Contents

Advertisement

IP address allocation by a separate DHCP server
For this reason, the workstation PCs have to be set up to automatically
retrieve their own IP address and those of the standard gateway and DNS
server via DHCP. The DHCP server is to be programmed such that the IP
address of the LANCOM is communicated to the PCs in the LAN as the
standard gateway. The DHCP server should also communicate that the
LANCOM is the DNS server.
Manual IP address assignment
If IP addresses in a network are statically assigned, then the IP address of
the LANCOM is to be set as the standard gateway and DNS server in the
TCP/IP configuration of each PC in the LAN.
Further information and help on the TCP/IP settings for your WLAN
Controller is available in the Reference Manual. For information on
the network configuration of workstation PCs, refer to the documen-
tation for the installed operating system.
LANCOM WLC series
Chapter 3: Basic configuration
41

Advertisement

Table of Contents
loading

Related Products for Lancom WLC-4006

This manual is also suitable for:

Wlc-4025+Wlc-4100

Table of Contents