Table of Contents
Advertisement
LANCOM WLC series
Chapter 4: Configuring the WLAN Controller
WLAN profiles
WLAN profiles are collections of the various settings that are to be assigned
to the Access Points. The allocation of WLAN profiles to the Access Points is
set in the AP table.
The following parameters can be defined for every WLAN profile:
LANconfig: WLAN Controller
WEBconfig: LCOS menu tree
ration
56
1: Switches the use of VLAN on; the management network remains
untagged, however.
2 to 4094: Switches the use of VLAN on; the management network
uses the VLAN ID set here.
VLAN activation only applies to WLAN networks which are connected
by means of these physical WLAN parameters.
All other physical WLAN parameters correspond to those for the
standard configuration of Access Points.
Common profiles
Profile name
Name of the profile under which the settings are saved.
Possible values:
Maximum 31 ASCII characters.
Default:
Blank
WLAN network list
List of the logical WLAN networks that are assigned via this profile.
Profiles
WLAN profiles
Setup
WLAN management
AP configu-
Advertisement
Table of Contents
