EGi Domos2 User Manual page 45

40271, 40281
SELECTING ZONE NAME
Enables you to select the name of the room where the control unit is located.
Do this as follows:
1. Press the key at the bottom twice for one second, until AUDIO is displayed.
2. Press the key at the bottom briefly and pass AUDIO > INTERCOM > SURVEIL >
until you reach MISCELL.
3. Then press the right-hand side key ( ).
4. Press the bottom key several times until ADJUSTM. is displayed.
5. Keep the key ( ) pressed until you are in the menu.
6. Navigate through the options by pressing the lower part of the control
unit, until ZONE is displayed.
7. Press the left (–) or right hand side ( ) to choose between the different
names (kitchen, bedroom...).
8. When the correct name has been selected, press the bottom button on
the control unit. The digit associated to the name will flash.
TOILET TOILET
Example:
9.
When the correct number has been selected, press the bottom button
on the control unit.
control unit
m i s c e l l
45
a d j u st m
nd nd
2
2
st st
1 1
Z O N e T O I L E T
nd st
2 1
st nd
1 2
T O I L E T – – T O I L E T – 2
st st
1
1
nd
2 1
www.egiaudio.com
st
1
st