EGi Domos2 User Manual page 37

40271, 40281
CALL
d o o r P H O
1
OPEN
DOORBELL FUNCTION
All DOMOS2 series Central units are designed so that you can hear your doorbell
in the entire EGi installation with a simple connection.
When somebody rings your doorbell, you will be able to hear a melody in the
areas of the installation where you have this function enabled.
To enable or disable this function, do as follows:
1. Press the key at the bottom twice for one second, until AUDIO is displayed.
2. Press the key at the bottom briefly and pass AUDIO > INTERCOM > SURVEIL >
until you reach MISCEL L.
3. Press the key on the right-hand side of the display ( ).
control unit
ANSWER 4.
5.
6.
END COMM
surveillance/babyphone function
SURVEILLANCE ZONE
A function offered by the control unit for monitoring the zone where it is installed. This can be used to know if a baby
or a sick person needs attention. This option is available if listening permission is enabled on the control unit.
To enable this function, do as follows:
1.
2.
3.
4.
5.
37
Press the bottom of the screen repeatedly until you reach ADJUSTM and keep ( ) pressed for a few
seconds. You will be in the ADJUSTMENT menu.
Use the lower button to navigate to BELL.
Use the side keys to choose between bell on (YES) or off (NO).
M I S C E L L A D J U ST M
nd
2
st
1
Press the key at the bottom twice for one second, until AUDIO is displayed.
Press the key at the bottom briefly and pass AUDIO > INTERCOM > until you reach SURVEIL.
Then press the right-hand side key ( ). MNITORED will be displayed.
Press the left (–) or right-hand side ( ) to choose NO (disabled) or YES (enabled).
The surveillance triangle will light up
B E L L
nd
2
st
1
.
www.egiaudio.com