EGi Domos2 User Manual page 18

40070, 40080, 40090, 40200
WARNING: If you turn the volume quite high, the installation will deliver distorted sound, losing quality. If this
situation happens, turn the volume down on the audio source until distortion disappears.
Connect a 40110 wire to the IR connector of the 40070 central unit and put the capsule on the audio source
sensor in order to control the audio source from any room with a DOMOS2 in-wall control unit, using the
remote control of the audio source or 40100/40130 remote control.
WARNING: This function may not be available for all remote control models.
40080 1 AUDIO PROGRAM + FM
1 Menu key.
2 Menu exit key. 5
3 OK/+ key.
4
4 NO/– key.
2
5 LCD display.
40080 Central unit has a FM program with 9 presets.
www.egiaudio.com
central units
for
Ø 60mm box
EGi ref. 40080
3
1
18
CHANGE A STORED RADIO STATION
1. Press the MENU key several times until AUDIO is displayed.
2. Press (OK/+) or (NO/–) to navigate through the stored radio stations
(from MEM 1 to MEM 9).
RADIO STATION SEARCH
To search for a radio station by frequency, do as follows:
1. Press the MENU key several times until AUDIO is displayed.
2. Press (OK/+) or (NO/–).
3. Press again. SEARCH is displayed.
4. Use(OK/+) and (NO/–), to search up or down through the radio band. To
start automatic search, hold the keys. To start manual search, press the
keys shortly, and it will start searching up/down through the radio band
every 50 KHz.
CHANGE STORED RADIO STATION
RADIO STATION SEARCH
M E M 4 M E M 4
nd nd nd
2 2 2
st
1
MANUAL
10 3 . 2 6
nd nd
2 2
st
1
nd
2
st AUTO
1
10 3 . 2 6
nd nd
2 2
st
1