EGi Domos2 User Manual page 41

40271, 40281
4. Keep the right-hand side key ( ) pressed while you speak, in order to
record the message. TALKING will be shown on the display.
m i s c e l l R E C M E S
nd
2
st
1
When you have a message recorded, the control unit display will display
MESSAGE in standby mode. If you wish to listen to it, do as follows:
1. Press the key at the bottom twice for one second, until AUDIO is displayed.
2. Press the key at the bottom briefly and pass AUDIO > INTERCOM > SURVEIL >
until you reach MISCELL.
3. Then press the right-hand side key ( ) and PLAY MES will be displayed.
If this is not the case, press the bottom part of the control as many times
as necessary until it is displayed.
4. Press the right-hand side to listen to the message.
5. If you wish to delete the message, press the left-hand side button. To
leave it in the memory, press any other button.
M E S S A G E m i s c e l l
1 5 : 4 8
nd
2
st
1
control unit
more adjustments
ADJUSTING BACKLIGHT POWER
This function enables you to adjust the intensity of the control unit backlight when it is off. To enable
T A L K I N G or disable this function, do as follows:
1.
M E S S A G E
2.
3.
4.
5.
6.
7.
LANGUAGE SELECTION
Enables the menu language to be selected. To modify this service, do as follows:
1.
P L A Y M E S
2.
3.
st nd st
1 2 1
4.
5.
6.
41
Press the key at the bottom twice for one second, until AUDIO is displayed.
Press the key at the bottom briefly and pass AUDIO > INTERCOM > SURVEIL > until you reach MISCELL.
Then press the right-hand side key ( ) .
Press the bottom key several times until ADJUSTM is displayed.
Keep the right-hand key pressed until you are in the menu.
Navigate through the options by pressing the lower part of the control unit, until LIGHT is displayed.
Press the left (–) and right-hand buttons ( ) to choose the desired light intensity from 0 (minimum)
to 9 (maximum).
m i s c e l l a d j u st m
nd
2
st
1
Press the key at the bottom twice for one second, until AUDIO is displayed.
Press the key at the bottom briefly and pass AUDIO > INTERCOM > SURVEIL > until you reach MISCELL.
Then press the right-hand side key ( ).
Press the bottom key several times until ADJUSTM is displayed.
Keep the key ( ) pressed until you are in the menu.
Navigate through the options by pressing the lower part of the control unit, until LANGUAGE is displayed.
l i g h t
nd nd nd
2 2 2
st st
1 1
www.egiaudio.com