Main Zone And Zone 2 Operation - Krell Industries HTS 2 Instructions For Use Manual

Operating the Home Theater Standard, continued
Notes ~
The tape output functions only with analog sources.
When changing sources, lower the volume to off or mute the output. This ensures that
the next source played does not damage your system with a high output transient.
MAIN ZONE AND ZONE 2 OPERATION
The Home Theater Standard has two audio zones, main and zone 2. The main zone
consists of the main viewing or listening area, and zone 2 consists of another listening
area. You can select a digital or analog audio, or a video device for the main zone. Zone
2 can only be used with an analog audio device. To configure a device that has both
digital and analog outputs, see Configure Devices, on page 32.
The Home Theater Standard's two-zone operation offers a number of listening options.
¯
You can play both zones simultaneously, with the main zone playing a device in one
part of the house and zone 2 playing a different (or the same) device in another part
of the house.
¯ With the Home Theater Standard in operational or stand-by mode, you can activate
the main zone only. Or, while the Home Theater Standard is still in stand-by mode,
you can set up zone 2 listening so that when you switch to operational mode, only
zone 2 plays.
¯
You can play a device using the main zone while using zone 2 to record.
The red LED illuminates when the input is engaged and playing in the main zone. The
green LED illuminates when the input is engaged and playing in zone 2.
Play Both Zones
With the Home Theater Standard in the stand-by mode:
1. Press and release the HT$ key (57) until the blue power LED illuminates,
2. Press the input device selection button or key for the device you wish to play,
3, Begin playing the device,
4. Press the Z2 key (59).
5. Press the input device selection button or key for another device to play in
zone 2. Or select the same input device button if you want the same device to play in
both zones.
6, Begin playing the device,
7, Press the HTS key again to turn off zone 2,
8, Press the Z2 key and the HTS key again to turn off the main zone.
54
Krell Home Theater Standard