Operation - Krell Industries S–150m Instructions For Use Manual

Definition of Terms,
continued

OPERATION

TECHNOLOGY
Krell S-150m
Off
The component is off when the rear panel button is in the down
position.
Stand-by Mode
A low power consumption status that keeps the audio circuits at idle.
Move the rear panel breaker switch to the on position and the power
status indicator illuminates in red. The component is now ready to
be switched to the operational mode. Krell recommends leaving the
component in the stand-by mode when it is not playing music.
Operational Mode
When the component is in stand-by mode, press the power button
on the front panel and the power status indicator will change to blue.
The component is in the operational mode and is ready to play
music.
12VDC Trigger
The S-150m may be turned on remotely via a 12 volt trigger.
Connect the 12V trigger output from a compatible device to the
12VDC trigger input. The S-150m will go from stand-by to opera-
tional mode when a 12 volts signal is applied. The S-150m will
return to Stand-by when the 12 volt signal is removed. The S-150m
can turn on other devices via 12 volt connection by connecting them
to the 12VDC trigger output. When the S-150m enters operational
mode, it will output 12VDC and remove it when returned to stand-by.
Input Selection
Put the input select switch in the posistion that matches the connec-
tion being used. Krell recommends the use of balanced/XLR when-
ever possible.
3