Krell Industries HTS 2 Instructions For Use Manual page 15

Front Panel Description,
continued
23 Front Panel Display
The front panel display provides status messages for Home Theater Standard
operations, including volume and balance level, decoding mode, and zone information.
In addition, when a new device is selected, the physical inputs are displayed. The
display turns off after five seconds of inactivity.
24 User Button
Use this programmable button to select one of three available dynamic range
compression modes: normal (11 dB), max(imum) (no compression), or night (22
See User Button Setup, on page 50. In addition, the user button can be deactivated.
25 Balance Button
Press this button to adjust the main left/right speaker balance. This button converts the
volume level controls to balance controls.
BAL
0 in the front panel display window
indicates the center position. Balance may be adjusted in .5 dB increments, up to 6 dB.
Balance levels are shown numerically on the front panel display. The balance level
buttons revert to their original functions as main volume level controls after three
seconds of inactivity.
Individual Channel Buttons
Use the Center, Rear, and Sub buttons to change taste trims (make temporary speaker
output adjustments of +/- 10 dB). These temporary changes revert to 0 dB when a new
device is selected or the system is powered down. For more information on taste trims
and master (programmable) trims, see Configure Level Adjustment, on page 39.
26 Center Button
Press the center button, then use the level up and down buttons (30) to adjust the
center speaker volume.
27 Rear Button
Press the rear button, then use the level up and down buttons (30) to adjust the rear
speaker volume.
28 Sub Button
Press the sub (subwoofer) button, then use the level up and down buttons (30) to adjust
the subwoofer speaker volume.
29 Save Button
Use this button to save system configuration settings and during learning remote
programming. See Saving Setup, Recalling Setup, and Restoring Factory Default
System Configuration Settings, on page 52, and Program Remote, on page 48.
Krell Home Theater Standard 11