Table of Contents
Advertisement
Input Gain
You can boost weaker signals by increasing the input gain value at the bottom left of
this screen (in 3 dg, 6 dg, and 9 dg gain increments).
To maximize your system's signal to noise ratio for a particular input, the input gain
value applied to the signal should be increased (if needed) to maintain a signal strength
close to 0 dB gain. The optimal signal gain value is 0 dB.
Anti Clip
Setting anti clip to ON engages automatic distortion protection. Anti clip measures the
signal level and prevents the input signal from distorting (clipping) the analog-to-digital
converters. Set anti clip to OFF if you want to disengage distortion protection. This is
particularly useful if you need to maintain maximum signal-to-noise thresholds when
recording from a source.
If you select a non-analog source to configure, you see the following screen:
KRELL HTS
-ANALOG INPUT WARNING-
YOU CANNOT SET
AN INPUT LEVEL FOR A
NON-ANALOG SOURCE
OK
Select OK and press enter (83) to return to the level adjustment menu.
Select OK and press enter (83) again to return to the main menu.
Krell Home Theater Standard
43
Hide quick links:
Advertisement
Table of Contents
