Krell Industries HTS 2 Instructions For Use Manual page 25

Remote Control Description,
continued
73 Pro Logic Key
Use this key to engage Dolby Pro Logic circuitry for use with all Dolby Surround
encoded material, including laser discs, videotapes, television broadcasts, and compact
discs.
Note
This mode is selected automatically when Dolby Digital source material is encoded for
Pro Logic. If you wish to turn off this mode, press the Pro Logic button.
74 Preamp Key
Use this key to send the signal from the analog input directly to the volume control, with
no digital processing, using the analog stage of the preamp. This avoids possible digital
signal degradation and can be used for components with a high quality signal such as
the KPS 28c. See Configure Mode, on page 36, for information on assigning the
analog input to one of the device buttons (DVD, LD, SAT, VCR, TV).
Control Function Keys
75 Bal Key
Press this key to convert the volume level controls to balance controls. See Balance
Button (25), on page 11.
Use the Center, Rear, and Sub keys to change taste trims (make temporary speaker
output adjustments of +/- 10 dB). These temporary changes revert to 0 dB when a new
device is selected, or the system is powered down. For more information on taste trims
and master (programmable) trims, see Configure Level Adjustment, on page 39.
76 Cntr Key
Use this key to select the center speaker, then use the 1" $ keys (80) to adjust volume.
77 Rear Key
Use this key to select the rear speaker, then use the 1" $ keys (80) to adjust volume.
78 Sub Key
Use this key to select the subwoofer, then use the 1" $ keys (80) to adjust volume.
79 Prey Key
Use this key to escape from a System Setup and Configuration on-screen menu to the
previously displayed screen. You can also use this key to keep triggers on while
switching devices. See Other Operation Features, on page 55.
80 Level Keys
Use these keys to adjust volume level, balance level, and to scroll through System
Setup and Configuration menus.
Krell Home Theater Standard 21